Using the local radio connection and the server

You will need the "OnSite Companion" smartphone app to commission the Jellox Pulse . It is available for both Android and iOS. However, the application can also be accessed as a progressive web app at the following address:

https://companion.microtronics.com/

Detailed instructions on using the "OnSite Companion"smartphone app are provided in chapter OnSite Companion.

Tip: It is recommended that the Jellox Pulse is first commissioned in the office before moving the measurement system to the operation site. During this process, you should set a site for subsequent operation on the myDatanet server (see Creating the site) and determine a site setting (see Site configuration). Take the opportunity to get to know the functions of the device in a stable environment. You can also use suitable test signals to simulate the counters and digital contacts, enabling you to optimise the configuration of the Jellox Pulse before the actual commissioning takes place. This reduces the time required for on-site installation to a minimum.

The following work should be completed in the office before you go to the operation site of the device:

If necessary, create a customer on the myDatanet server (see "myDatanet Server Manual " 805002).
Within the desired customer, create a new site/application for operation of the Jellox Pulse on the myDatanet server (see Creating the site).
Use the "OnSite Companion" smartphone app to synchronise the Jellox Pulse and the myDatanet server (see Synchronisation with the myDatanet server). Select "Synchronise device", use the magnifying glass icon to search for compatible devices and click on the desired device in the list displayed.

The application can also be accessed as a progressive web app at the following address (https://companion.microtronics.com/). This means that a PC or laptop can also be used instead of a smartphone. However, in this case, the search for devices within range is not available. The serial number must be entered manually or scanned using the camera icon.
Configure the created site/application according to your requirements (see Site configuration).
If the Jellox Pulse should remain deactivated up to the installation on the operation site, seledt "Deactivated" in the title bar of the configuration section "Measurement system" (see Measurement system).
Trigger a synchronisation between the Jellox Pulse and the myDatanet server again to transmit the configuration of the site to the Jellox Pulse .

The following tasks are to be completed directly at the operation site of the device:

Complete all steps described in chapter Connecting the meters and the digital contacts.For the variant with the external antenna connector (Type key D022‑4Z001200D05), you also need to connect the antenna (see Connecting the mobile network antenna (only with D022‑4Z001200D05)).
Ensure that "Active" is selected in the title bar of the confiuration section "Measurement system" (see Measurement system).
Configure the basic settings for the measurement channels via the "Channel settings" input screen (siehe Inputs in "Counter" mode).

Note: An active mobile connection between the Jellox Pulse and the myDatanet server is required to set the meter readings (see Set meter reading).
Use the "OnSite Companion"smartphone app to synchronise the Jellox Pulse and the myDatanet server (see Synchronisation with the myDatanet server). Select "Synchronise device", use the magnifying glass icon to search for compatible devices and click on the desired device in the list displayed.

The application can also be accessed as a progressive web app (https://companion.microtronics.com/). This means that a PC or laptop can also be used instead of a smartphone. However, in this case, the search for devices within range is not available. The serial number must be entered manually or scanned using the camera icon.
If you intend to install the Jellox Pulse in an inspection chamber, please ensure that the device can establish a mobile network connection in its final mounting position with the inspection chamber closed before leaving the installation site. The wizard to complete the "Guided commissioning" can be used for this purpose (see "Guided commissioning" input screen). It carries out several measurements of mobile signal strength and, based on the results, provides an assessment of signal quality.