Connecting the mobile network antenna (only with D022‑4Z001200D05)

Important:
  • To ensure the correct functionality, only use antennas that are supplied by the manufacturer.
  • When using extension cables, the total lenght of the cable connection for the antenna must not exceed 30 m.

The standard antenna is directly connected to the antenna connector (see Front of the Jellox Pulse ) of the Jellox Pulse .

  1. Connect the connection cable of the antenna directly to the antenna connector of the Jellox Pulse (see Front of the Jellox Pulse ).
    2. The following step is not mandatory.
  2. Check whether the connection to the myDatanet has worked correctly (see Testing communication between device and server (mobile network connection)).