Specifications

Voltage supply 9...32 VDC (+/-10 %)

 

Additional information is provided in Technical details about the energy supply.
Power consumption

typ. 5 W (without sensors)

max. 9 W (without sensors)
Integrated rechargeable buffer battery Rechagreable Li-Po battery with 500 mAh for sending a notification in the event of a power failure.

 

Additional information is provided in Technical details about the integrated rechargeable buffer battery.
Housing

Material:

Weight:

Degree of protection:

Dimensions (WHD):

Lexan/Noryl

190 g

IP20 / IP40 (connection area/operating area)

70 x 92 x 63 mm (without antenna)

Operating temperature -20...+60 °C
Air humidity 15...90 % RH non-condensing
Storage temperature -40...+85 °C
Charging temperature (rechargeable buffer battery) 0 ...+45 °C
Display RGB-LED to indicate the operating state and error codes
Operation Button to trigger
  • a new connection establishment if the online connection has been aborted,
  • a complete device synchronisation with established online connection or
  • a connection establishment in interval mode.

In all cases, the server assignments are also checked.
System time Hardware real-time clock with its own buffer battery (service life >10 years) and automatic time synchronisation with the server.

 

Additional information is provided in Technical details about the system time.
Antenna connector 1 x SMA-F for mobile network
Universal inputs

3 x analogue or digital

Modes:

  • 0/0...20 mA: Resolution 6,36 µA, max. 23,96 mA, load 96 Ω
  • 0...2 V: Resolution 610 µV, max. 2,5 V, load 10k086
  • 0...10 V: Resolution 7,97 mV , max. 32 V, load 4k7
  • Digital: low <0,99 V, high >2,31 V, max. 32 V, load 4k7
  • Day counter: pulse length min. 1 ms, max. 32 V, load 4k7
  • Interval counter: pulse length min. 1 ms, max. 32 V, load 4k7

 

Additional information is provided in Technical details about the universal inputs.
Outputs

2 x relay:

  • Umax: 32 V
  • Imax: 2 A

 

Additional information is provided in Technical details about the outputs.
USB interface 1 x mini-B USB 2.0 slave for the connection to a PC. The DeviceConfig configuration program must be installed on the PC to enable communication with the myDataconC3 .

 

Additional information is provided in Technical details about the USB interface.
Data memory Internal flash memory for up to 80.656 measuring cycles

 

Additional information is provided in Functionality of the internal data memory.
Data type f32 (32 Bit floating point)
Data transmission

M1/NB1 EU (myDatalogC32x M1/NB1 EU ):

  • LTE B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66 (M1)
  • LTE B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66 (NB1/NB2)

2G/4G World (myDatalogC32x 2G/4G World ):

  • 2G GPRS 900MHz / 1800MHz
  • 2G GPRS 850MHz / 1900MHz
  • LTE FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B66
  • LTE TDD B34, B38, B39, B40, B41

SIM The myDataconC3 is equipped with an integrated SIM chip.