Measurent values provided
The following measurement values are provided by the PRE-PT-D30 . The PRE-PT-D30 does not have any user interface nor can it establish a direct connection to the myDatanet server. It therefore depends on the data logger used which of these measurement values are available on the web interface of the myDatanet server.
Pressure [mbar]
Pressure determined by using a piezoresistive sensor and taking the medium temperature
into account (see Measurement method)
Temperature of the medium [0,1°C]
Temperatur des mit der Membran des Drucksensors in Kontakt stehenden Mediums (d. h.
die Wassertemperatur).
Max. pressure during a pressure surge [mbar]
Highest pressure reading recorded during a pressure surge
Min. pressure during a pressure surge [mbar]
Lowest pressure reading recorded during a pressure surge
Battery voltage [mV]
Current voltage of the battery installed in the PRE-PT-D30
Estimated remianing remaining battery life [h]
Remaining time until battery replacement
Status flags [ ]
Status of the systems
This is a status register containing individual flags. Several of these flags may be set at the same time.
