Online help for PRE-PT-D30
General product information
The PRE-PT-D30 is a battery-powered, stationary sensor for measuring pressure levels and water temperature in water supply networks. The watre pressure is determined using a piezoresistive sensor, the diaphragm of which is in direct contact with the medium being measured. Temperature-related factors affecting pressure measurement are automatically compensated for. Thanks to the standardised process connection, the PRE-PT-D30 can be screwed directly into the water pipe. With the built-in battery and data transmission via a local wireless connection, no on-site cabling is required. The compact design of the PRE-PT-D30 also makes it ideally suited for use in areas where space is limited. The ultra low power technology used allows for a long battery life with both short measurement intervals and high resolution.
Product specifications:
- Drinking water certification pending
- High resolution
- Large measurment range
- Short measurment interval
- Compact dimensions
- Ultra Low Power Technologie
- Data transmission via local radio connection
- Very low commissioning and operating costs
- No cabling required
Fields of application:
- Valve monitoring
- Pressure reducing valve (PRV) monitoring
- Water temperature monitoring
Frequently asked questions (FAQs)
How do I activate the PRE-PT-D30
?
The PRE-PT-D30 does not have a special transport mode. I.e. it is always ready for operation and does not have to be activated.
How do I deactivate the PRE-PT-D30
?
The PRE-PT-D30 does not have a special transport mode and therefore does not need to be deactivated.
A more detailed explanation is provided in section Storage of the product.
