Testing communication between device and server (local radio connection)
- Within the desired customer, create a new site/application for operation of the Jellox Pulse on the myDatanet server (see Creating the site).
- Use the "OnSite
Companion" smartphone app to
synchronise the Jellox Pulse
and the myDatanet server (see Synchronisation with the myDatanet server). Select "Synchronise device", use the magnifying glass icon to search
for compatible devices and click on the desired device in the list displayed.
The application can also be accessed as a progressive web app at the following address (https://companion.microtronics.com/). This means that a PC or laptop can also be used instead of a smartphone. However, in this case, the search for devices within range is not available. The serial number must be entered manually or scanned using the camera icon.
- Configure the created site/application according to your requirements (see Site configuration).
- Complete all steps described in chapter Connecting the meters and the digital contacts.
- Trigger the synchronisation between the Jellox Pulse and the myDatanet server again to transmit the configurations of the site to the Jellox Pulse .
- Wait until some measurement values have been recorded. The waiting time depends on the configured record interval (see Device settings)
- Trigger the synchronisation between the Jellox Pulse and the myDatanet server again to transmit the recorded measurement values to the myDatanet server.
- Wait until the "OnSite
Companion" smartphone
app indicates that the synchronisation process is completed.
Synchronisation completed
- Click on the "Direct Report" symbol in the list of sites/applications to display the
data saved on the myDatanet server.
- Check whether all of the data up to the point of the synchronisation is present and
plausible. Pay particular attention to the mobile nework signal strength.
Tip: Additional explanation on the assessment of the "Mobile radio field strength":":
"RSSI" > -70 dBm 
-70...-99 dBm 
-100...-109 dBm 
-110...-124 dBm 
-125...-130 dBm 
<= -131 dBm 
The following
steps are only necessary if you also want to test the measurement value acquisition and the
data transmission at this time:
The following steps are only required if you also want to
test the measurement value acquisition and the data transmission at the same
time.
