Overflow module

This module monitors the measurement range limits of the raw value. If a universal input was, for example, switched to "4-20 mA" mode, a raw value of 2 mA will violate the measurement range. The overflow module is only available for the 2 universal inputs in "4-20 mA" and "0-20 mA" channel modes.

The following table specifies the relevant parameters for the module:

Configuration section	Mode/Interface	Parameter	Explanation
Measurement channels -> Configuration	Digital	---	---
	4-20 mA	Overflow	Procedure in the event of measurement range violations
	0-20 mA