Solenoid switch
The MDN Magnet (206.803) is required to operate the solenoid switch.
Operating the solenoid switch
| 1 | MDN Magnet (206.803) | 2 | myDatalogEASY IoT ATEX |
The Solenoid switch can be used to initiate Aloha transmission mode or to instruct the device to immediately issue the error/status code.
| User action | Device response | Operation after releasing the button |
|---|---|---|
| Press and hold for less than three seconds | Status LED illuminates green. | Error/status code is issued (see Three colour status LED) |
| Press and hold for three seconds | Status LED changes from green to orange. | Aloha transmission mode (see Aloha transmission mode) |
