Storage
The following storage conditions must be observed:
| myDatalogEASY IoT ATEX | Storage temperature | -20...+50 °C |
| Humidity | 15...90 % RH | |
| PSU713
BP (300526) | Operating temperature | -20...+50 °C |
| Storage temperature | +20...+25 °C | |
| PSU413D+ AP (300524) | Operating temperature | ‑20...+60 °C |
| Charging temperature | ‑20...+60 °C | |
| Storage temperature | 0... +30 °C | |
| PSU DC (300529) | Operating temperature | -20...+60 °C |
| Storage temperature | 0... +35 °C |
Tip: The table above only contains the storage conditions for the energy sources
used most frequently for the myDatalogEASY IoT ATEX . Please consult the
appropriate factsheet for information about the storage conditions of other power supply
units.
Note: If a Li-Ion rechargeable battery is to be stored for a longer period, it is
recommended to ensure that the charge level is 40 % to 60 % of the maximum charge.
Important: Remove the power supply unit from the myDatalogEASY IoT ATEX prior to storage.
Store the measurement technology so that it is protected against corrosive or organic solvent vapours, radioactive emissions as well as strong electromagnetic radiation.
