Scale module (inputs)
This module rescales the raw value (e.g. mA) to the required measurement value (e.g. mm). The scale module is only available for the 3 universal inputs as well as the modbus measurement channels.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode/Interface | Parameter | Explanation |
|---|---|---|---|
| Measurement channels -> Basic | Digital | Invert | Inverts the input signal |
| Cnt.Day | Impulse | Counted measurand of a pulse in the measurement unit | |
| Cnt.Intrvl. | |||
4-20 mA 0-20 mA 0-2 V 0-10 V | 0 % | Start of the measurement range in the measurement unit | |
| 100 %
| End of the measurement range in the measurement unit | ||
| Modbus measurement channels -> Scale | RS485 | 0 % Modbus | Start of the measurement range in the unit of the modbus server (i.e. raw value to be read from the modbus server) |
| 100 % Modbus | End of the measurement range in the unit of the modbus server (i.e. raw value to be read from the modbus server) | ||
| 0 % | Start of the measurement range in the measurement unit | ||
| 100 % | End of the measurement range in the measurement unit |
