Scale module (inputs)
This module rescales the raw value (e.g. mA) to the required measurement value (e.g. mm). The scale module is only available for the 3 universal inputs.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode | Parameter | Explanation |
|---|---|---|---|
| Measurement channel -> Basic | Digital | Invert | Inverts the input signal |
| Cnt.Day | Impulse | Counted measurand of a pulse in the measurement unit | |
| Cnt.Intrvl. | |||
4-20 mA 0-20 mA 0-2 V 0-10 V | 0 % | Start of the measurement range in the measurement unit | |
| 100 %
| End of the measurement range in the measurement unit |
