Overflow module

This module monitors the measurement range limits of the raw value. If a universal input was, for example, switched to "4-20mA" mode, a raw value of 2mA will violate the measurement range. The overflow module is only available for the 3 universal inputs in "4-20 mA", "0-20 mA", "0-2 V" and "0-10 V" channel mode.

The following table specifies the relevant parameters for the module:

Configuration section	Mode/Interface	Parameter	Explanation
Measurement channels -> Configuration	Digital	---	---
	Cnt.Day
	Cnt.Intrvl.
	4-20 mA	Overflow	Procedure in the event of measurement range violations
	0-20 mA
	0-2 V
	0-10 V