Decay module
The decay module is designed to summarise several measurement values. The average value over a required time frame or the minimum value within a required time frame can be determined, for example. The decay module is only available for the 3 universal inputs, with the exception of "Cnt.Day" channel mode.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode | Parameter | Explanation |
|---|---|---|---|
| Measurement channels -> Configuration | Digital | Decay | Temporal function in the measurement cycle |
| Quantity | Number of measurement values taken into consideration during the decay (max. 64). In theses modes, a measurement value is created upon expiry of the measurement cycle and when the input signal level is changed. The changes to the inputs are monitored at one second intervals. | ||
| Cnt.Day | --- | --- | |
Cnt.Intervl. 0-2 0mA 4-20 mA 0-2 V 0-10 V |
Decay | Temporal function in the measurement cycle | |
| Quantity | Number of measurement values taken into consideration during the decay (max.
64).
|
