Device labelling

The specifications in this user manual apply exclusively to the measurement system "myDataconC3 ", which is composed of the following components:

  • IoT application "myDataconC3"
  • Data logger "myDatalogC3xx"

The type plate of the myDatalogC3xx is located on the right side of the device and contains the following specifications:

  • Type designation
  • Serial number
  • Item number
  • Voltage supply specifications
  • Week and year of production
  • Country list profile of the SIM chip
  • Environmental conditions during operation
  • Degree of protection
  • Hardware revision
  • Name and address of the manufacturer
  • Logo for the EU WEEE Directive
  • CE marking

The correct specification of the type designation and serial number is important for all queries and spare part orders. Only then can we process requests promptly and properly.

Type plate myDatalogC3xx

Tip: This symbol indicates the country list profile of the SIM chip installed in the device.

Note: These operating instructions are part of the device and must be available to the user at all times. The safety instructions contained therein must be observed.

Attention: It is strictly prohibited to disable the safety equipment or modify its mode of operation.