Connection examples
Note: Since the universal inputs of the device are not galvanically isolated, it is
not possible to add the myDataconC3
to an existing 4-20 mA
current loop (e.g. between sensor and SPS). Use a suitable isolation transformer in this
case.
Connection examples (OC output, digital, 4...20 mA)
| 1 | myDataconC3 | 4 | Isolated relay contact |
| 2 | Sensor with open collector output | 4 | 2-wire mA sensor |
Connection examples (0...20 mA, 0...2 V, 0...10 V, converter)
| 1 | myDataconC3 | 3 | Signal converter, isolating transducer |
| 2 | 3-wire mA sensor or 3-wire U-sensor |
