Initial Start-Up

User information

Before you connect the VEL‑R‑5 and place it into operation, you must observe and comply with the following user information!

This manual contains all information that is required for using the device.

Is intended for technically qualified personnel who have the relevant knowledge and experience in the area of measurement technology.

Read this manual carefully and completely in order to ensure the proper functioning of the VEL‑R‑5

Contact Microtronics Engineering GmbH(see Contact information) if anything is unclear or if you encounter difficulties with regard to installation, connection or configuration.

Applicable documents

In addition to this operating instructions, additional instructions or technical descriptions may be required for the installation, commissioning and operation of the entire system.

These instructions are enclosed to the respective additional devices or sensors or are available for download on the Microtronics website.

General principles

The entire measurement system may only be placed into operation after completion and inspection of the installation. Study the manual thoroughly before placing into operation to prevent faulty or incorrect configuration.

Utilise the manual to familiarise yourself with the operation of the VEL‑R‑5 and the input screens of the myDatanet server before you begin with the configuration.