Disclaimer

The manufacturer assumes no liability

for damages owing to a change of this document. The manufacturer reserves the right to change the contents of this document and this disclaimer at any time and without any notice.

for damages to persons or objects resulting from failure to comply with applicable regulations. For connection, commissioning and operation of the devices/sensors all available information and higher local legal regulations (e.g. in Austria ÖVE guidelines) such as applicable Ex regulations as well as safety requirements and regulations in order to avoid accidents shall be adhered to.

for damages to persons or objects resulting from improper use. For safety and warranty reasons, all internal work on the instruments beyond from that involved in normal installation and connection, must be carried out only by qualified Microtronics personnel or persons or companies authorised by Microtronics .

for damages to persons or objects resulting from the use of instruments in technically imperfect condition.

for damages to persons or objects resulting from the use of instruments not in accordance with the requirements.

for damages to persons or objects resulting from failure to comply with safety information contained within this instruction manual.
for missing or incorrect measurement values or resulting consequential damages due to improper installation or incorrect parameterisation/programming.