Solenoid switch
The MDN Magnet (206.803) is required to operate the solenoid switch.
Operating the solenoid switch
| 1 | MDN Magnet (206.803) | 2 | Solenoid switch |
If the device is in mode "Deactivated", pressing the solenoid switch briefly (for approx. 1 sec.) will activate the local radio interface for approx. 10 minutes. Pressing and holding the magnetic switch (> 3 sec.) will trigger a transmission, regardless of the mode.
| User action | Device response | Operation after reaching the required contact time |
|---|---|---|
| Press and hold for < 3 sec. | Status LED on | If the device is in mode "Deactivated", the local radio interface is activated for approximately 10 minutes. |
| Press and hold for 3 sec. | Status LED starts flickering | Transmission is initiated |
