App log entries

The app log is opened via the context menu, which is displayed by clicking on the three-dot symbol in the list of sites.

Code	Plain text	Description
amr.cnt	cmd:10, in:<#>, old:<Cnt old>, new:<Cnt new>	The meter reading of input <#> has been changed from <Cnt old> to <Cnt new> by the user. 1)
amr.cnt	Counter [<#>]: read error (<reslult>)!	Error when determining the measurement values for the input operated in "Counter" mode <#> .1) If this error appears several times, contact the manufacturer (see Contact information)
amr.cnt	Counter [<#>]: close error (<reslult>)!
amr.cnt	Counter [<#>]: reinit error (<reslult>)!
amr.ok	cmd success: <cmd> = <parameter>	The meter reading could be set successfully.
amr.warn	Stuck detected on IN<#>	Blocked meter output at input <#> detected The meter output has been closed for more than 2 sec. .
amr.warn	cmd error: <cmd> = <result>	The meter reading could not be set. <result> Explanation -1 If this error appears several times, contact the manufacturer (see Contact information) -2 An attempt was made to set the counter reading although the measurement channel was not switched to "Counter" mode. -3 By the time the command was received, its validity had already expired.

¹⁾ The numbering of the inputs starts at "0".