Remote sensor module of type PRE-PT-D30
Basic settings
Input window "Remote sensor module of type PRE‑PT‑D30 ", tab "Basic settings"
| 1 | Type of the sensor module used for determining the
measurement value
PRE‑PT‑D30 (400420): module for determining pressure and water temperature in water supply networks using a piezoresistive sensor. |
|
| 2 | Serial number of the sensor module used for determining the measurement value | |
| 3 | Freely selectable, variable part of the designation for the measurement values
recorded via the sensor module assigned to the measuring channel
Several measurement values are recorded for each of the remote measurement channels. Their name is made up of the variable part and a fixed part which depends on the type of sensor module it is assigned to (e.g. "myName - Meter reading", "myName - Quantity", etc. for sensor modules of the type "PRE-PT-D30"). |
|
| 4 | Buttons for switching between the individual tabs of the input window | |
| 5 | Selection of the unit of pressure used by all of the server display elements. This setting affects only the display of measurement values. The measurement values are always stored in millibars (mbar), regardless of the selected unit of pressure. | |
| mBar | Millibar | |
| Bar | Bar | |
| 6 | Button to apply the settings
Note: To save the settings, the "Save" button below the "Smart Actions" configuration
section must also be clicked.
|
|
Expert settings
Input window "Remote sensor module of type PRE‑PT‑D30 ", tab "Expert settings"
