Specifications

Voltage supply Battery: Li-MnO2 battery pack with a capacity of 10,6 Ah
Housing

Material:

Noryl GTX 973 / PC

(housing/cover)

Weight:

340 g (incl. battery)

Dimenstions (WHD):

91 x 129 x 46 mm

Protection class:

IP66 / IP68 :

  • 105 days at an immersion depth of 1 m
  • 35 days at an immersion depth of 4 m

Operating temperature

(standard)

 -10...+60 °C
Operating temperature

(extended)

-20...+60 °C

Operation with possible deterioriation of the connection stability (especially when the signal strength is low and/or the capacity of the battery is virtually depleted) outside the standard operating temperature range.
Air humidity 15...90 % RH non-condensing
Max. operating altitude ≤ 2000 m
Pollution degree PD2
Storage and transport temperature -30...+85 °C
Display 12 individual symbols illuminated via LED for signalling the operating state
Operation Reed switch for activating the display and triggering a transmission
Antenna connector Type key D022‑4Z00121L905: internal antenna

Type key D022‑4Z001200D05: FME-M
Inputs

4 x counter or digital

Minimum pulse length: >1 ms

 

Additional information is provided in Technical details about the inputs.
Remote measurement channels Jellox Pulse Pro: remote measurement channels are not available

Jellox Pulse Elite : 4 x sensor module (connection via local radio)

 

The sensor modules are not included in the standard scope of supply. You will find the specifications for the sensor modules in the relevant manual.

 

A list of compatible sensor modules is provided in chapter Sensor modules.

Data memory Jellox Pulse Pro: Internal flash memory for up to 131.068 measurement cycles

Jellox Pulse Elite : Internal flash memory for up to 57.610 measurement cycles

 

Additional information is provided in Functionality of the internal data memory.
Data type

Inputs:

Meter reading:

s64 (64 Bit signed)

Amount per recording:

f32 (32 Bit floating point)

Flow rate per recording:

f32 (32 Bit floating point)

Digital (contact position and actuation state):

u8 (8 Bit unsigned)

Remote measurement channels:

Primary measurement value:

f32 (32 Bit floating point)

Secondary measurement value:

f32 (32 Bit floating point)

Battery voltage:

f32 (32 Bit floating point)

Days until battery replacement:

f32 (32 Bit floating point)

Flags:

u32 (32 Bit unsigned)

Local radio signal strength:

s8 (8 Bit signed)

Data transmission

Local radio connection:

Range:

up to 20 m 1)

LTE-M/NB-IoT modem (world):

M1:

LTE B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66

NB1/NB2:

LTE B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66

SIM

Integrarted SIM chip

1) Depending on ambient and structural conditions