Decay module
The decay module is designed to summarise several measurement values. The average value over a required time frame or the minimum value within a required time frame can be determined, for example. The decay module is only available for the 4 universal inputs, with the exception of "Cnt.Inf." and "Cnt.Day" channel modes.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode | Parameter | Explanation |
|---|---|---|---|
| Measurement channels ‑>Config. | Digital | Decay | Temporal function in the measurement cycle |
| Quantity | Number of measurement values taken into consideration during the decay (max. 64). In theses modes, a measurement value is created upon expiry of the measurement cycle and when the input signal level is changed. The changes to the inputs are monitored at one second intervals. | ||
| Cnt.Inf. | --- | --- | |
| Cnt.Day | |||
Cnt.Intrvl. 0-20 mA 4-20 mA 0-2 V 0-10 V |
Decay | Temporal function in the measurement cycle | |
| Quantity | Number of measurement values taken into consideration during the decay (max.
64).
|
