Device labelling

The specifications in this user manual apply exclusively to this "4-Channel Data Logger " measueremnent system that consists of the following components:

  • IoT application "4-Channel Data Logger"
  • myDatalogEASY IoTmini

The type plates are located on the right side of the device and contain the following specifications:

  • Type designation
  • Item number
  • Manufacturer's address
  • Specification of the device family
  • Serial number
  • Environmental conditions during operation
  • Degree of protection
  • Country list profile of the SIM chip
  • Hardware revision
  • CE marking
  • Chargeable features released at the time of delivery

The correct specification of the type designation and serial number is important for all queries and spare part orders. Only then can we process requests promptly and properly.

Type plates myDatalogEASY IoTmini

Tip: This symbol indicates the country list profile of the SIM chip installed in the device.

Note: These operating instructions are part of the device and must be available to the user at all times. The safety instructions contained therein must be observed.

Attention: It is strictly prohibited to disable the safety equipment or modify its mode of operation.