Powered by mains adapter

This supply concept is particlularly suitable if an energy source (230 V AC volltage) is already available at the installation site.

The following components are required to implement the supply concept:

• Top-hat rail DIN (301070)

• Power supply 24V 0,63A for top-hat rail mounting (301066)

• Power Supply Unit with integrated protective circuit
  • PSU DC+ (300798 recommended)
  • PSU DC (300529)

The Top-hat rail Top-hat rail DIN (301070) allows two components, each with a width of one division unit (1 TE), to be installed in the terminal compartment of the 4-Channel Data Logger . This also includes the Power supply 24V 0,63A for top-hat rail mounting (301066) required for mains operation. TheTop-hat rail DIN is an order option. It cannot be ordered retrospectively and installed by the customer themselves.

Both the PSU DC+ (300798) and the PSU DC (300529) feature an integrated protective circuit to prevent interference and fluctuations in the supply voltage, making them particularly suitable for use in control cabinets and industrial environments. The PSU DC+ is additionally equipped with a backup battery that allows short-term power failures to be bridged and, if necessary, a failure message to be sent. Detailed information on the two power supply units is provided in chapter Technical details about the energy supply.