Compatible sensors
Microtronics Engineering GmbH is constantly testing various sensors with mA output for compatibility with the 4-Channel Data Logger . If your sensor is not on the list, please contact us at support@microtronics.com. We will then check whether your sensor can be used together with the 4-Channel Data Logger and determine the recommended configuration settings.
Note: The specifications for sensor supply
and warm-up time are recommendations. The required warm-up time depends on the operative
conditions and must be determined by the user in the respective application and installation
situation. If the current consumption of the sensor exceeds the capacity of the sensor
supply of the 4-Channel
Data Logger , the correct function can be
established if necessary by increasing the sensor supply (within the system limits). The
information in the following table is without guarantee and Microtronics Engineering GmbH assumes no responsibility if an
installation set up based on the information contained in the table does not function as
expected.
| Manufacturer | Designation | Type | Sensor supply / warm-up time | Scaling (0/4mA, 20mA)1) |
|---|---|---|---|---|
| VEGA | Vegapuls C21 | Radar sensor | 15 V / 15 sec. | 0...20 m (4-20 mA) |
1) This is the factory default setting. If the user has changed the sensor configuration, the actual settings may differ.
