Safety instructions for cabling
Important: To avoid any damage, always switch off the voltage supply to the device when performing electrical connections.
When connections are made to the 4-Channel Data Logger , the following warnings and information must be observed, in addition to the warnings and information found in the individual chapters on the installation. Further safety information is included in Safety instructions.
Remove the power supply unit from the device before completing any wiring work.
Removing the power supply unit
| 1 | Delta PT M3,5x25 Torx 15 | 3 | Housing cover |
| 2 | Power supply unit | 4 | Strap to remove the power supply unit |
