General product information

The system is a compact, stationary measurement system that can be used for control and regulating tasks in addition to recoding and transferring analogue and digital signals. It is composed of a data logger (see Suitable data loggers) with installed IoT application "myDataconC3". To simplify matters, the measurement system will be referred to as "myDataconC3 ". The myDataconC3 requires a constant energy supply. However, the data logger has an integrated rechargeable buffer battery which allows sending a notification in the event of a voltage supply failure (see Technical details about the integrated rechargeable buffer battery). To record measurement data, there are 3 universal inputs available which can be operated in different analogue and digital modes. Furthermore 2 x relays are available for control and regulating tasks, of which the setpoints can be determined wirelessly from a central point. The measurement data of the input are determined in an adjustable interval (see Basic settings) and together with the states of the outputs they are temporarily stored in an internal data memory. As the default connection type for myDataconC3 is "online" mode, the recorded data is immediately transmitted wirelessly to the myDatanet server. If the alternative connection type "interval" is used, the recorded data is transmitted to the myDatanet server in a freely selectable interval. In both cases this connection is also used to transfer the configuration to the measurement system. For this purpose, the measurement system has an integrated SIM chip. To manage and display the transferred data, the central myDatanet server offers various possibilities. Further information is provided in the user manual of the server ("myDatanet Server Manual " 805002). The measurement system is also configured via the interface of the relevant myDatanet server.