Scale module (outputs)

This module rescales the setpoint (e.g. mm) into the desired physical size (e.g. frequency) for the output.

The following table specifies the relevant parameters for the module:

Configuration section	Mode	Parameter	Explanation
Output channels	off	---	---
Output channels	Digital	Invert	Inverts the level issued on the device
Output channels - analogue	off	---	---
	0-20 mA 4-20 mA 0-24 V	0 %	Start of the output range in the measurement unit
	0-20 mA 4-20 mA 0-24 V	100 %	End of the output range in the measurement unit
Output channels - digital	off	---	---
Output channels - digital	Digital	Invert	Inverts the level issued on the device