Scale module (inputs)
This module rescales the raw value (e.g. mA) to the required measurement value (e.g. mm). The scale module is only available for the 15 universal inputs.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode | Parameter | Explanation |
|---|---|---|---|
| Measurement channel -> Basic | Digital | Invert | Inverts the input signal |
| Cnt.Day | Impulse | Counted measurand of a pulse in the measurement unit | |
| Cnt.Intrvl. | |||
4-20 mA 0-20 mA 0-2 V 0-10 V | 0 % | Start of the measurement range in the measurement unit | |
| 100 %
| End of the measurement range in the measurement unit |
