Filter module

The filter module is designed to compensate for brief fluctuations to the input signal. This module is only available for the 15 universal inputs.

The following table specifies the relevant parameters for the module:

Configuration section	Mode	Parameter	Explanation
Measurement channels -> Configuration	Digital	Filter time	Time in [ms] during which the signal must remain constant to initiate a level change. Used to suppress brief faults (debouncing).
	Cnt.Day
	Cnt.Intrvl.
	4-20 mA	Filter time	Time in [ms] during which the analogue signal is averaged for signal smoothing. Used to suppress signal noise (also see Output channels on the myDatalogC3xx).
	0-20 mA
	0-2 V
	0-10 V