Decay module
The decay module is designed to summarise several measurement values. The average value over a required time frame or the minimum value within a required time frame can be determined, for example. The decay module is only available for the 15 universal inputs, with the exception of "Cnt.Day" channel mode.
The following table specifies the relevant parameters for the module:
| Configuration section | Mode | Parameter | Explanation |
|---|---|---|---|
| Measurement channels -> Configuration | Digital | Decay | Temporal function in the measurement cycle |
| Quantity | Number of measurement values taken into consideration during the decay (max. 64). In theses modes, a measurement value is created upon expiry of the measurement cycle and when the input signal level is changed. The changes to the inputs are monitored at one second intervals. | ||
| Cnt.Day | --- | --- | |
Cnt.Intervl. 0-2 0mA 4-20 mA 0-2 V 0-10 V |
Decay | Temporal function in the measurement cycle | |
| Quantity | Number of measurement values taken into consideration during the decay (max.
64).
|
