Analogue outputs on output extension (mA OUTPUT)
Tip: The analogue outputs of the myDatalogC3e 3mA/6Rel
are active, galvanically
isolated current outputs.
| max. load voltage | 21,5 V |
| max. load (21,5 V , 24 mA ) | 890 Ω |
| Iout | 0-20 mA , 4-20 mA or 0-24 mA (depending on selected mode) |
| Iout max | 24 mA |
Schematic diagram: connection of an actuator
| 1 | myDataconC3+ | 2 | Actuator (e.g. metering pump controllable via analogue signal) |
