Connection examples
Note: As the universal inputs of the device are not galvanically separated, it is
not possible to include the myDataconC3+
in an existing 4-20 mA
current loop (e.g. between sensor and SPS). In this case, use a suitable isolation
transformer.
Data logger
Connection examples (OC Output, digital, 4...20 mA)
| 1 | Data logger (e.g. myDatalogC32x 2G/4G World | 4 | Isolated relay contact |
| 2 | Sensor with open collector output | 4 | 2-wire mA sensor |
Connection examples (0...20 mA, 0...2 V, 0...10 V, converter)
| 1 | Data logger (e.g. myDatalogC32x 2G/4G World | 3 | Signal transformer, isolation transformer |
| 2 | 3-wire mA sensor or 3-wire U-sensor |
