Device labelling
The specifications in this user manual apply exclusively to the LVL-R-5 device type. The type plates are located on top and on the sides of the device and contain the following specifications:
- Name and address of the manufacturer
- Environmental conditions during operation
- Protection class
- Logo for the EU WEEE Directive
- CE marking
- Marking of the top side (only relevant for inclined installation)
- Ex protection designation as specified in chapter Declaration of conformity
- Product name
- Type key
- Item number
- Week and year of production
- Product revision
- Serial number
Type plates LVL-R-5
The correct specification of the type designation and serial number is important for all queries and spare part orders. Only then can we process requests promptly and properly.
Note: These operating instructions are part of the device and must be available to
the user at all times. The safety instructions contained therein must be observed.
Attention: It is strictly prohibited to disable the safety equipment or modify its mode
of operation.
