Installing USB Adapter driver

Note: Information on the USB Adapter (300685) is provided in chapter USB Adapter .

The following chapter describes the installation process in Windows 7.

  1. Complete all of the steps described in chapter Installation.
  2. Close the DeviceConfig configuration program, if, when completing the installation, you selected the option for the program to be started following completion of the installation process.
  3. Connect the USB Adapter (300685) to a free USB port on your PC. From Windows Vista onwards, the driver will be installed automatically. Instructions on installing the driver on older versions of Windows are included in the user manual for the DeviceConfig ("myDatanetDeviceConfig Manual " 805004).
    Tip: If possible, always use the same USB port, as the driver will have to be installed for every USB port used to connect the USB Adapter (300685) to the PC for the first time.
  4. Wait until the driver installation process is complete. This can take several minutes depending on the performance of your PC.