App log entries
The app log is opened via the context menu, which is displayed by clicking on the three-dot symbol in the list of sites.
In the following table, the placeholder "<ch>" represents the number of the remote measurement channel starting at "1" for the first measurement channel.
| Code | Plain text | Description | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AppFlash | changed |
Tip: The following actions can currently only be carried out by the
manufacturer.
|
|||||||||||||||||
| BLE Adin | BLE: Connection established | The measurement channel (0/4...20 mA input) is configured and ready for use | |||||||||||||||||
| BLE: Connection closed | The internal radio connection to the measurement channel (0/4...20 mA input) has been disconnected | ||||||||||||||||||
| BLE ConnDebug | xxx | Debug infomation about the wireless connection between a remote sensor module and the device | |||||||||||||||||
| BLE Gauge | BLE: Connection established (<ch>) | The radio connection to a remote sensor of the type "Gauge" has been established, the sensor is configured and ready for use | |||||||||||||||||
| BLE: Connection closed (<ch>) | The radio connection to a remote sensor of the type "Gauge" has been disconnected | ||||||||||||||||||
| BLE Radar | BLE: Connection established (<ch>) | The radio connection to a remote sensor of the type "LVL-R-5" has been established, the sensor is configured and ready for use | |||||||||||||||||
| BLE: Connection closed (<ch>) | The readio connection to a remote sensor of the type "LVL-R-5" has been disconnected | ||||||||||||||||||
| BleSensor_Event | BLE_SENSOR_EVT_ERROR | Internal error If this error occurs several times in the app log, please contact the manufacturer (see Contact information). |
|||||||||||||||||
| CustomerValues | Mount ##, Trim ## | The modifications of the installation height and trimming have been correctly adopted by a sensor module of the type "LVL-R-5" | |||||||||||||||||
| Offset ##, Trim ## | The modifications of offset and trimming have been correctly adopted by a sensor module of the type "Gauge" | ||||||||||||||||||
| GaugeStartMeas | measure error | Measurement could not be initiated. A sensor module of the type "Gauge" is concerned. | |||||||||||||||||
| sensor not ready(<ch>) <state> | A sensor module of the type "Gauge" is not ready for initiating a new
measurement.
|
||||||||||||||||||
| HandleTimer | Retry connection(<ch>) | The radio connection to a remote sensor has been lost. An attempt is made to re-establish the connection. | |||||||||||||||||
| Radar | UpdateStarted(<ch>) | The process for updating the firmware of a sensor module of the type "LVL-R-5" has been launched. | |||||||||||||||||
| Radar | UpdateDone(<ch>) with <result> | The update process has been finished.
|
|||||||||||||||||
| RdMeasV | ERROR | A measurement value could not be read from a sensor module of the type "LVL-R-5". | |||||||||||||||||
| RadarStartMeas | measure error | Measurement could not be initiated. A sensor module of the type "LVL-R-5" is concerned. | |||||||||||||||||
| sensor not ready(<ch>) <state> | A sensor module of the type "Gauge" is not ready for initiating a new
measurement.
|
||||||||||||||||||
| RadarUpdate | Timeout<ch> | A timeout has occured when updating the firmware of a sensor module of the type "LVL-R-5". | |||||||||||||||||
| SensorEvent | Sensor <ch> not allowed! | Sensor type not supported or max. number of permitted remote sensors has been exceeded. | |||||||||||||||||
| Execute(<ch>) 0x<cmd>, Res = <result> | A special command has been transmitted to the sensor übermittelt
|
||||||||||||||||||
| DisconnectSensor(<ch>) | Connection to the remote sensor has been disconnected intentionally (e.g. when activating transport mode or deactivating the 0/4...20 mA input) | ||||||||||||||||||
| LOGBLE_EVT_BLE_CONNECTING(<ch>) | Establishing radio connection to a remote sensor | ||||||||||||||||||
| LOGBLE_EVT_BLE_CONNECTED(<ch>) <SN> | Radio connection to the remote sensor with the serial number <SN> has been established. | ||||||||||||||||||
| LOGBLE_EVT_BLE_DISCONNECTED(<ch>) | Radio connection to a remote sensor has been disconnected. | ||||||||||||||||||
| LOGBLE_EVT_BLE_ERROR(<ch>): <state> | Error when establishing the radio connection to a remote sensor
|
||||||||||||||||||
| SensorSupply | ON | Measurement channel (0/4...20 mA input) has been enabled |
