Storage
The following storage conditions must be adhered to:
| Jellox Analog | Storage temperature | -20...+70 °C |
| Humidity | 15...90 % RH | |
| Sensor module | Storage temperature | See chapter "Storage" in the manual of the relevant sensor module |
| Humidity |
Important: During storage, the sensor connector must be
covered using the protective cap (type "UTS10DCG") which is included in the scope of supply.
If necessary, the protective cap must be cleaned before attaching it.
Note: The batteries remain in the devices during storage.
Store the device so that it is protected against corrosive or organic solvent vapours, radioactive emissions as well as strong electromagnetic radiation.
