Connecting the mobile network antenna

Important:
  • To ensure the correct functionality, only use antennas that are supplied by the manufacturer.
  • When using extension cables, the total lenght of the cable connection for the antenna must not exceed 30 m.

The standard antenna is directly connected to the antenna connector (see Front of the Jellox Analog ) of the Jellox Analog .

  1. Connect the connection cable of the antenna directly to the antenna connector of the Jellox Analog (see Front of the Jellox Analog ).
    2. The following step is not mandatory.
  2. Check whether the connection to the myDatanet has worked correctly (see Testing communication with the device).