General product information

The Jellox Analog is a compact, battery operated, stationary measurement device designed for recording and transmitting a mA signal as well as measurement values that are provided by remote sensor modules. Information about measurement range, resolution, precision, measurement method and capacity of the intstalled battery is provided in the user manual of the respective sensor module. Communication between the sensor module and the Jellox Analog is realised via local radio connection. Depending on the ambient conditions, the bridgeable distance can be up to 20 m . In addition to the primary measurement value (i.e. level with installation height and trimming taken into account), up to 3 secondary measurement values (e.g. distance to the surface, amplitude and temperature of the electronics) and the internal measurement values "Battery", "Battery life" (remaining days until the next battery replacement), "Flags" (sensor status) and "RSSI" (local radio signal strength) are determined for the sensor modules. To record the mA signal, a corresponding sensor connector is available directly on the Jellox Analog . The sensor is also supplied via this connector. For this purpose, the Jellox Analog has an adjustable (0...22 V ) voltage output. To save energy, the voltage output can be configured so that it is only activated briefly before and during measurement. In addiditon to the primary measurement value, the 3 secundary measurement values "Sensor supply", "Number of sample measurements" and "warmup time" as well as the inernal measurement value "Flags" (sensor status) are determined for the mA input. Furthermore the internal measurement values "SOC" (State of Charge), "Battery", "Int. Temp", "rH" (humidity inside the housing), "GSM" (mobile network signal strength), "Service" (remaining days until the next battery replacement) and "Load" (energy cosumption between two recordings) of the Jellox Analog are determined.

The measurement data of the remote sensor module is determined at an interval of 10 sec. (to monitor the conditions under which a "Smart Action" is triggered) and can be recorded in the internal data memory at an adjustable interval (see Device settings ). The measurement interval for the mA input at the Jellox Analog is configurable (see Device settings ). In this interval, the conditions under which a "Smart Action" is triggered are monitored. For recording the measurement data of the mA input, the same interval as the one for the remote sensor module is used.

The recorded data can be read out locally via radio connection or, in a freely selectable interval, transmitted automatically to a central myDatanet server via mobile network connection. The device is equipped with an integrated SIM chip for this purpose. This To read out the data locally via radio connection and to simultaneously forward it to a central myDatanet server, the "OnSite Companion" smartphone app (see OnSite Companion) can be used. The myDatanet server provides a variety of options for managing and displaying the data. More information is provided in the server manual ("myDatanet Server Manual " 805002). The device is configured via the interface of the relevant myDatanet server. If the level falls below or exceeds a defined value (applicable for both the measurement value determined via the mA input and the primary measurement value and internal measurement values provided by the remote sensor modules), regardless of the transmission cycle that is currently set, the "Smart Actions" can be used to initiate an immediate transmission, to start an immediate recording, to trigger a warning or an alarm, to switch to an alternative transmission interval or to activate an alternative transmission interval (see Edit Smart Action).

The Jellox Analog has a 1,5" OLED display to show the current measurement values and various status information (e.g. remaining days until the next battery replacement of the sensor module). The display is activated via reed switch. Detailed information on this is provided in chapter Display.