Specifications
| Voltage supply |
Rechargeable battery::
Battery:
direct supply:
Additional information is provided in Technical details about the energy supply. |
||||||||
| Supply or charging voltage | 12...32 VDC (max. 12 W ) | ||||||||
| Housing |
|
||||||||
| Operating temperature | -20...+60 °C | ||||||||
| Air humidity | 15...90 % RH non-condensing | ||||||||
| Max. operating altitude | ≤ 2000 m | ||||||||
| Contamination level | PD2 | ||||||||
| Storage temperature | -30...+60 °C | ||||||||
| Display | Three-colour LED for signalling the operating state | ||||||||
| Operation | Solenoid switch for initiating Aloha transmission mode | ||||||||
| Antenna connector 1) |
up to 2 x FME-M |
||||||||
| Universal input 2) |
4 x analogue or digital Modes:
Additional information is provided in Technical details about the universal inputs. |
||||||||
| System time | Hardware real-time clock with its own buffer battery (life span >10 years) and automatic time synchronisation with the server
Additional information is provided in Technical details about the system time. |
||||||||
| Internal sensors |
Temperature inside the housing
Humidity inside the housing
|
||||||||
| External temperature sensor 3) | 1 x PT100/1000 including auto detection)
Additional information is provided in Technical details about the PT100/1000 interface. |
||||||||
| Modbus RTU 4) (Client, formerly master) |
Number of modbus channels that can be processed:
1 x onBoard RS485 (2-wire) 5) 6)
1 x RS485 (2-wire) via interface card 7)
Additional information is provided in Technical details about the onBoard RS485 interface bzw. RS485 interface extension |
||||||||
| Outputs |
1 x switchable 3,3 V supply (max. 180 mA ) Modes:
1 x switchable and adjustable sensor supply: Output voltage (selectable via configuration parameter):
Modes:
1x isolated switch contact:
Modes:
Additional information is provided in Technical details about the outputs. |
||||||||
| Local radio interface 8) | Low energy module | ||||||||
| USB interface | 1 x mini-B USB 2.0 slave
for the connection to a PC. The DeviceConfig
configuration program must be installed on the PC to enable communication with the 4-Channel
Data Logger MBM .
Additional information is provided in Technical details about the USB interface. |
||||||||
| Data memory | Internal flash memory for up to 14.360 measurement cycles
Additional information is provided in Functionality of the internal data memory. |
||||||||
| Data type | Infinite counter: s64
(64 Bit signed) Other measurement data: f32 (32 Bit floating point) |
||||||||
| Data transmission |
2G/3G/4G World (myDatalogEASY IoT 2G/3G/4G World )
2G/M1/NB1 World (myDatalogEASY IoT 2G/M1/NB1 World )
|
||||||||
| SIM 9) | The following options can be selected using the DeviceConfig
configuration program:
Additional information is provided in Using the external SIM slot |
1) The number of the antenna connectors and their assignment depends on the chosen variant of the myDatalogEASY IoT and potentially installed additional modules.
2) The universal inputs 3 and 4 are only available if the onBoard RS485 interface is not used.
3) In order for the external temperature sensor to be used, the chargeable feature "Activation code temperature input (300542)" must be unlocked or order option "Feature activation temperature input (300732)" is required.
4) A simultaneous use of the onBoard RS485 interface and the RS485 interface of the interface card is not possible.
5) In order for the onBoard RS485 interface to be used, the chargeable feature "Activation code RS485 (300540)" must be unlocked or order option "Feature activation RS485 (300730)" is required.
6) The onBoard RS485 interface is only available if the universal inputs 3 and 4 are not used.
7) The RS485 interface of the interface card is only available if the device has been ordered with the order option "RS485 interface extension (301401)".
8) reserved for extensions
9) In order for the SIM slot to be used, the chargeable feature "Activation code VPN SIM (300539)" must be unlocked or order option "Feature activation VPN SIM (300729)" is required.